Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Warning
titleImportant safety message

DO NOT use Aivia VR if you have a previous medical history of seizure or epilepsy. Make sure you read and fully understand the health and safety warnings prior to using Aivia VR to reduce the risk of personal injury, discomfort or property damage.


In Virtual Reality view in Aivia, the VR controllers that are supplied with your headset is the primary mode for interacting with the scene inside the VR space. Typically, the controllers have several buttons that are bound to a specific interaction. You can move your controller freely about the VR space to interact with specific objects within the scene.



Panel

On this page:

Table of Contents


Controller buttons

An example of a VR controller is shown on the right. For the purpose of this help file, we will be describing the interactions using the controls scheme of the controller that comes with the HTC Vive VR headset. Specific buttons and functions may vary depending on your VR controller.

There are five (5) buttons on each controller:

  • The Menu button is the uppermost button on the face of the Vive controller; it is currently reserved for future functionality.
  • The Trackpad is the large, touch-sensitive circle that occupies a majority of the controller's space.
  • The Systems button is the lowermost button on the face of the Vive controller; it is used for opening up the Systems menu for SteamVR.
  • The Trigger button is located on the backside of the Vive controller and serves as the primary input method for manipulating the environment in Aivia VR. It is also the method for button and slider selections while in the Steam Systems menu.
  • The Grip buttons are located on the side of the Vive controller; each controller has two grip buttons on either side that must both be pressed together (by squeezing the controller) in order to activate its interactive features.



HTC Vive controller diagram


Interactions

The controller interactions are summarized in the table below.

InteractionControllerButtonInstructionsVideo walkthrough (click to play)
FlyingLeft handTrackpad

Press up to bring the scene towards you

Press down to move the scene away from you

The speed of the flythrough will depend on the position you pressed on the trackpad (faster the closer to the edge is pressed) as well as the magnification of the scene

Multimedia
name3D flythroughs.mp4
width80%
height80%
ZoomingBoth handsTrigger

Pull and hold both triggers firmly, then pull the controllers away from each other to zoom in / magnify the scene

Pull and hold both triggers firmly, then pull the controllers toward each other to zoom out / shrink the scene

Multimedia
nameZoom in_out.mp4
width80%
height80%
GrabbingEither handTrigger

Pull the trigger and hold it firmly to grab the item in front of you,

To rotate the object, rotate the controller about your wrist; release the trigger to place the object in the specified rotation

To move the object, move the controller around; release the trigger to place the object in the specified location

Multimedia
nameGrab objects.mp4
width80%
height80%
PanningBoth handsTriggerPull and hold both triggers firmly, then move both controllers in parallel around the VR space; the controllers should stay roughly the same distance apart
ClippingLeft handGrip

Squeeze the grip buttons on the left controller firmly to activate clipping plane / ortho slicer mode; move the controller about to adjust the position and orientation of the clipping plane / ortho slicer; release the grip buttons to clip the scene in the specified position and orientation

Double-squeeze the grip buttons to toggle between clipping plane and ortho slicer modes

Multimedia
nameClipping Plane.mp4
width80%
height80%
Multimedia
nameOrtho slicer.mp4
width80%
height80%
Adjust display modeEither handSystemsPress the Systems button to open the SteamVR Systems Menu. Point the controller cursor at the Aivia icon on the dock at the bottom of the Systems screen; pull the trigger button to open the Display Settings. Once in the Display Settings, you can toggle the visibility of individual channels and object sets
Stepping through timeRight handTrackpad

Press or lightly tap the trackpad on the right to move forward one frame in time

Press or lightly tap the trackpad on the left to move backward one frame in time

Hold down on the trackpad firmly to move forward / backward multiple frames; release to stop the playback at the current time point

Multimedia
namePlayback Sequence.mp4
width80%
height80%
ResettingRight handGripSqueeze the grip buttons on the right controller once to reset the scene; this will return the display to its original position, rotation and magnification
Multimedia
nameReset scenes.mp4
width80%
height80%




Filter by label (Content by label)
showLabelsfalse
max5
spacescom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@836
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel in ("basic-ops","vr","interactions") and type = "page" and space = "AW"
labelsgetting-started tutorial


Page Properties
hiddentrue


Related issues